Configuring MettleCI Workbench to increase session timeout

MettleCI Workbench ships with a default configuration which causes your Workbench session to timeout after 60 minutes of inactivity. This session limit (which is specified in minutes) can be modified by specifying a userInactiveTimeout value in your MettleCI config.yml file:

To increase the session timeout from 1 hour to 2 hours, for example, configure this line in config.yml:

CODE

userInactiveTimeout: 120

To remove the session timeout entirely (which we would not recommend) set the limit to 0 minutes:

CODE

userInactiveTimeout: 0

After each change to your config.yml file you will need to restart the MettleCI Workbench service for the change to take effect.